HASEGAWA là đơn vị chuyên cung cấp các giải pháp và thiết bị công nghiệp chất lượng cao, nổi bật với các sản phẩm như con lăn HASEGAWA, con lăn hút chân không HASEGAWA và máy lắc vòi sen HASEGAWA tại thị trường Việt Nam.
Năm 1985, ông Hironobu Hasegawa chính thức đảm nhiệm vị trí Chủ tịch, đánh dấu bước chuyển mình quan trọng của doanh nghiệp. Đến năm 1986, công ty đổi tên thành HASEGAWA MACHINERY LIMITED và ký kết thỏa thuận cấp phép công nghệ “Máy cắt & Sấy khí” với Bachofen & Meier AG (Thụy Sĩ), mở rộng năng lực và khẳng định vị thế trên thị trường quốc tế.
Đại lý Việt Nam – Công Ty TNHH TM KT Hưng Gia Phát
HASEGAWA Viet Nam Distributor / Hotline : 0938 906 663 / Email : Sales1@hgpvietnam.com
HASEGAWA HGP Viet Nam
SUCTION ROLL
Since establishing an enterprise, number of productions exceeds 1500.
MSD The production possible size of SHELL
Outside diameter Min-220mm, Max-1500mm
Hole size Min-1.5mm, Max-15mm
Shell length Min-1500mm, MAX-7500mm
Con lăn hút chân không HASEGAWA
Hole processing uses the twist drill with the multiple drilling machine.
The suction hole is correspondence possible in STRAIGHT, COUNTERSUNK and SPOT FACING.
The angle of COUNTERSUNK is 30 degrees or 18 degrees.
Shell-Straight Shell-Straight hole
Pick-up,Felt(Transfer) Shell-Countersunk Shell-Countersunk
Couch
Shell-Spot facing Shell-Spot facing
Cylinder,Forming Cover-Straight Cover-Straight
Pick-up Press,Press,Touch
Cover-Countersunk Cover-Countersunk
Couch Cover-Straight&Blind drill Cover-Straight&Blind drill
Press,Touch
The material of Shell is the centrifugal casting stainless steel (13Cr or Duplex). Our company, soft cover (Min:180 P&J) can be processed into a hole.
Con lăn hút chân không HASEGAWA
After finishing hole, the inside diameter and outside diameter grinding.Therefore, no damage to internal seals and wire or felt.
The material of Internal-BOX is the stainless steel or the steel (User selects).
SUCTION ROLL of 4 types.
All type “Suction position adjusting device” , “Suction angle adjusting device” and “Internal shower pipe” are included.
A.Standard type Trunnion type with inside bearing
B.Trunnion type with inside bearing
Trunnion type without inside bearing
C.Trunnion type without inside bearing
Trunnion type with gear drive
D.Trunnion type with gear drive
HASEGAWA Việt Nam
SHOWER OSCILLATOR “SL-3B SERIES”
1. Original spherical bearing support system
The oscillate body is protected from abnormal load by the spherical bearing support, and it makes automatic adjustment.
This device prevents abnormal load on the direct drive unit from shower pipe strain, vibration, and changes in the installation points. This eliminates oscillator breakdown and greatly increases service life.
2. Designed to save energy and space
Due to its superior low friction mechanism, enables use of the high performance low output small scale motor.
Compared with conventional oscillators, the miniaturization and light weight of this device permit installation in very small spaces, as a real energy saving space saver.
HASEGAWA Việt Nam
3. Easy alignment to shower pipes
Optional choice is possible from among the 4 directions (up, down, left, right) for installation of the shower pipe to the oscillate.
The shower pipe can be installed only by loosening one screw.
4. Completely sealed lubrication for the drive unit
Oil bath lubrication system used for the drive unit, to prevent oil leakage at oil seals.
Superior wear resistance of the ceramic coating at the oscillate rod surface holds down rod wear.
Also, a stainless cover over the rod prevents external water and dust from adhering to the rod surface.
Con lăn HASEGAWA, Con lăn hút chân không HASEGAWA, Máy lắc vòi sen HASEGAWA.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
HASEGAWA Việt Nam / Hotline : 0938 906 663
Mr Giàu –
Con lăn hút chân không HASEGAWA